Free tool
Latex size calculator
Enter your measurements and the sheet thickness you want. We apply the pattern reduction and return the finished measurements your garment should be cut to — plus a measurement sheet you can copy and send with your order.
Your measurements
Enter at least one measurement to see the finished sizes.
How to read this
"Cut to this" is the finished measurement of the flat garment, not the size of body it fits. A latex piece is always made smaller than you are — that tension is what makes it cling.
Not sure where the tape goes? Start with the measuring guide.
What the calculator does
Natural latex is cut below body measurements so the sheet is already under tension when worn. The reduction depends on the sheet thickness: thinner sheet stretches further, so it is cut smaller. Our model uses 14–17% at 0.25 mm, 12–15% at 0.40 mm, 10–13% at 0.60 mm, 8–11% at 0.80 mm and 6–9% at 1.00 mm, with small corrections for the neck, underbust, waist, thigh and upper arm where the body curves differently.
Choose "Comfortable" if you want an easier garment to get into, "Extra tight" if you want maximum compression. If this is your first latex piece the calculator returns the looser end of the range; experienced wearers get the tighter end.
Send the measurement sheet with your order and we cut from it. See also the thickness guide and the size guide.